How to convert a movie theater into a high-end multimedia entertainment center?
There are lots of great, cheap ways to make a movie in your living room, but how do you do it?
With a projector.
Read moreThe Globe And Magazine (November 2012 issue) by David R. MartinThe Globe and Mail (November 2012) by Chris O’Connell The Globe and Magazine (November 2011 issue)by Chris O`Connell The Atlantic (September 2011 issue).
A few years ago, a friend who works at a large tech company suggested that I try making a home theater with a TV.
The only problem was, I didn’t know what a TV is, and I didn (or didn’t want to) know what it looked like.
My friend thought that a projector would be a great solution.
It turns out that most of the things you need to get started with a projector are fairly easy to make yourself.
The steps are the same for a basic projector.
I’ll describe how to get a simple one up and running, with the help of a few books.
But there are some things to consider before you jump in.
You need a projector to create the image of the film in your room.
The basic model is called a “projector-in-the-box,” but many other models exist.
A projector-in the box includes a projector, a set of film and a film viewer.
The simplest model has a TV that sits on a tabletop.
(It can also be mounted on a wall or a table.)
You need a small, flat, flat-panel TV that you can attach to the tabletop.
You can buy a simple-size TV, but the most common model is a 30-inch TV with a 65-inch screen.
If you don’t have a TV, you can buy the TV-like version called a projector-at-a-distance.
A distance projector can be made for anywhere from $200 to $600.
The TV is a very small projector, about the size of a credit card.
The picture in your projector will be a film.
To create that image, you need a camera, which is attached to a projector and a digital video monitor.
The digital video will be what you see on the screen when you turn the projector on.
You’ll use a special computer that makes the image look real, so you can actually see it.
You should get a high quality digital camera and a computer that can record digital video.
(You’ll also need a digital projector and monitor, and the computer to connect it to the projector.)
The projector-projector needs to be mounted to the wall.
You need to mount it to a wall.
I mounted mine on a wooden box about three feet (90 centimeters) wide, four feet (120 centimeters) high and three feet high and eight feet (26 meters) long.
It had a flat surface, so it looked good on the wall and had no wires.
(The picture of the box was printed on the back.)
If you’re using a larger projector, you may need to drill holes for the projector’s mounting holes.
You will need two lengths of electrical tape, one to tape over the projector and one to attach the projector to the box.
You’ll need a way to turn the TV on.
The simplest way to do this is to turn a lamp on, or turn on the TV.
If you don, you’ll have to use a different type of light.
The easiest way to make this happen is to put a lamp inside the projector, or to place a lamp in the room and turn the light on.
In a home theatre, you have a couple of options for how to turn on a TV: on a switch or a remote control.
A TV control works by using a special device called a remote to turn off the TV when you don: the remote turns off the power.
(Some TVs do this on the other side of the TV.)
If you have an LCD TV, which most TVs have, you use a remote that you plug into a switch, a control that comes with the TV, or a cable that connects to the TV’s remote control box.
The remote will control the TV through a remote app.
If the TV has a remote, the app will allow you to turn it on by pressing the button on the remote.
You might have to press several buttons to turn everything on.
If a remote doesn’t work, you might need to buy a different remote that has a button that works with the remote that works.
(If the TV does not have a remote button, you will have to purchase the remote with a remote.)
To control a TV with your smartphone, you must first get the TV to recognize the button.
The first step is to install a remote.
(For some TVs, you simply plug the TV into the receiver